SUNWEIT Industrial Limited is a Multinational Group which focus on high-tech products R&D, manufacture and sales. OEM&ODM is welcome!

    OEM/ODM LED LED STRIP LIGHT  |  LED CONTROLLER---SUNWEIT

    Home > Product > Strip Light set > BedLight
    1. Bedlight Motion Sensor Kit With 1.5M led Strip, Black version
    2. Bedlight Motion Sensor Kit With 1.5M led Strip, Black version
    3. Bedlight Motion Sensor Kit With 1.5M led Strip, Black version
    4. Bedlight Motion Sensor Kit With 1.5M led Strip, Black version

    Bedlight Motion Sensor Kit With 1.5M led Strip, Black version

    • Item Type:
    • P/N. :

    2835 Bed Motion Sensor Light Kit  Installation:Step 1-- Stick LED Strips Under BedFind a clean flat surface under bed, peel off 3M sticky tape from LED strips and stick onto the beside.LED s

    1. Description
    2. Download

    2835 Bed Motion Sensor Light Kit

    blob.png


    blob.png 
     


    blob.png

    blob.png

    Installation:

    blob.png

    Step 1-- Stick LED Strips Under Bed

    Find a clean flat surface under bed, peel off 3M sticky tape from LED strips and stick onto the beside.

    LED strips are advised to face the floor to avoid strong light hurting your eyes or disturbing other sleepers.

    Please ensure the female end is positioned close to the nearest power point.

    Note: Please ensure the surface is clearn from dust, oil or paint corrosion before sticking LED strips. If you

    Feel that the strip light is not stick firmly, please use the clips and screws to make the strip light fixed.

    blob.png

    Step 2-- Motion Sensors Install and Connect Wire

    Find a suitable surface on the end of the bed frame to fix the sensor(on each side of the bed). Please take into account where you will be moving around the bed for the coverage angles of the sensor(s)

    Remove 3M adhesive sticker wrap and stick sensor(s) onto a flat surface.

    Once done, you can now connect the sensor(s) to the LED strip(s) installed.

    If you have installed on both sides of the bed, you can now use the Y cable lead provied to connect both sensors and LED strips to receive one power source.

    Note: if you have only installed one side of the bed, do not need to use Y cable lead and skip to next step.


    blob.png


    Step 3--Connect Power adapter

    Now you are ready to provide power to your bed light.

    A-For installations with both sides active, simply plug the power adapter into the Y cable lead.

    B-For installations with only one side active, plug the power adapter straight into the female end of the sensor lead.

    Note: Please ensure that the mains power is switched off before connecting into the power adapter. Once the circuit has been fully installed, then you may proceed to switch on the mains power.


    blob.png

    Package details:

     

    1.5meters per roll, packed in color box as below picture. 

    blob.png

    LED Strip Application

    1. Scope of application of 2835 led strip

    2. Architectural decoration lighting

    3. Backing lighting for signage letters

    4. Archway/canopy and bridge edge lighting

    5. Auditorium walkway lighting

    6. Amusement park/theater/aircraft cabin mood lighting,

    7. Stairway accent lighting,DIY lights for home use

    8. Channel letters lighting

    9. Decorative lights for holiday, events, show and exhibition,etc.