SUN-TH05 Plastic shell Full touch RGB controller
RF touch remote control RGB controller
This RF touch remote control RGB controller adopted the advanced touch technology, Mainly used to control all kinds of constant voltage led products, such as LED source, flexible strip, wall washer, glass curtain wall light and so on. This controller is with indicating light and power off memory function, next time to used it, will start with the model it save. Easy connection and simple to used is the representative advantages of this controller. User can choose different changing mode, adjust the speed and brightness, turn on/off by the remote control according to their preference .
• Working temperature：-20~60℃
• Supply voltage：DC12V~24V
• Output：3 Channel
• Connection mode：Common anode
• Controller size：L85×W45×H23mm
• Net weight：98g
• Static power consumption：<1W
• Output current：<4A/CH
• Output power：12V:<144W；24V:<288W
Remote control Function:
Direction for use:
• Function introduction:
⒈ Use the RF remote control, no need to make the remote direct to the controller,and the RF remote can controlled it across obstacles.
⒉ In the open area remote control distance is over 30 meters;
⒊ Each controller and the remote are sticked with an unique ID on it,each controller can be study two remote control’s ID,this means that
one controlled can be controlled by two remote at the same time.Besides,this controller can make it to be controlled by the unique remote ,
or make one remote to controlled many controller as well.
⒋ the controller is full touch remote with color right on it , user can change the color simply by touch the color ring.
• Operation method:
① Connect the load wire at first, following by the power wire; Please ensure short circuit can not occur between connecting wire before you turn on the power;
② Just the ON key is valid in OFF condition, to turn on the controller by press the ON key for the first time.the controller will be in the same mode as last time it save.
③ when controller is on ,press the Mode button can change the mode(Total 18 mode),the mode are as following table:
⒋ Matching code:
Press for 3 times within 15 seconds when power on again, the light blink 5 times if matching is successful.