SUN-TH01 Plastic shell RF Touch 5 keys Led dimmer
Product Description:This RF touch Single color led dimmer adopt the RF wireless remote control
• This RF touch Single color led dimmer adopt the RF wireless remote control,can adjust
brightness infinitely to change the lights brightness according to the customer’s preference.
• Working temperature：-20~55℃
• Supply voltage：DC12V~24V
• Output: 2 Channel(2Channel signal are the same)
• Connection mode：Common anode
• Controller size：L85×W45×H23mm
• Net weight：88g
• Static power consumption：<1W
• Output current：<4A/CH
• Output power：12V:<96W；24V:<192W
Power input interface:
Power 1: Adopt male and female connector with screw.
Power 2: Adopt the DC female Connector.
Load output interface:
Adopt male and female connector with screw.
Direction for use:
• Function introduction：
- Use the RF remote control, no need to make the remote direct to the controller,and the RF remote can controlled it across obstacles.
- In the open area remote control distance is over 30 meters;
- Each controller and the remote are stick with an unique ID on it,each controller can be study two remote control’s ID,this means one
controller can be controlled by two remote at the same time.Besides,this controller can make it to be controlled by the unique remote ,
or make one remote to controlled many controller as well.(remarks:need to make to order)
• Operation method:
- Connect the load wire at first, following by the power wire; Please ensure short circuit can not occur between connecting wire before
you turn on the power；
- Adopt wireless 433.9mhz RF Touch 5 keys remote control, its function as follows:
Three kinds of dynamic effects of the key dynamic model is optional, the style is as follows:
• Match code function Instruction: Every dimmer is already match code with the unique remote(the ID in the remote and the dimmer are the same),
if the user want to match code again, then just need to press the ON/OFF key for FIVE times within 5 seconds after powered the dimmer.
• Remarks:One receiver can be match code with two remote at the same time.if one remote match code with many receiver, than can realize one
remote to controlled many receiver.