PCI Express 82599EN Single 10GbE Server Ethernet NIC

Intel® 82599 10 Gigabit Ethernet Controller, Transforming the data center through a reliable and unified 10GbE network

  • PO.: ST7213
  • P/N.: SE-LTI599A-BT
  • Chipset: Intel® 82599EN
  • Bus type: PCI Express X8
  • Interface: RJ-45 (Copper)

Intel® 82599 10 Gigabit Ethernet Controller

Transforming the data center through a reliable and unified 10GbE network


- Feature

• PCI Express* 2.0, dual port 10 Gigabit Ethernet controller along with Intel® Xeon® processor 

   5500 series servers deliver the performance that demanding applications require.

• Industry-leading product innovations for I/O virtualization that are ideal for the dynamic data center.

• Unified networking support simplifies the network infrastructure by allowing LAN, SAN, 

   and IPC traffic to share the same data center fabric.

• Energy-efficient design with integrated SFI/KR PHYs that creates new opportunities for Blades

   and LAN-on-motherboard (LOM) solutions.

High-volume stable architecture with broad operating system support.




PRODUCT FEATURES

General

• Single port 10 GbE device or Single Port device (82599EN)
• Serial Flash Interface
• 4-wire SPI EEPROM Interface
• Configurable LED operation for software or OEM customization of LED displays
• Protected EEPROM space for private configuration
• Device disable capability
• Complies with the 10 Gb/s and 1 Gb/s Ethernet/802.3ap (KX/
KX4/KR) specification
• Complies with the 10 Gb/s Ethernet/802.3ae (XAUI) specification
• Complies with the 1000BASE-BX specification
• Complies with the IEEE 802.3x 100BASE-TX specification
• Support for jumbo frames of up to 15.5 KB
• Auto negotiation Clause 73 for supported mode
• CX4 per 802.3ak
• Flow control support: send/receive pause frames and receive
FIFO thresholds
• Statistics for management and RMON
• 802.1q VLAN support
• TCP segmentation offload: up to 256 KB
• IPv6 support for IP/TCP and IP/UDP receive checksum offload
• Fragmented UDP checksum offload for packet reassembly
• Message Signaled Interrupts (MSI)
• Message Signaled Interrupts (MSI-X)
• Interrupt throttling control to limit maximum interrupt rate and improve CPU usage
• Receive packet split header
• Multiple receive queues (Flow Director) 16 x 8 and 32 x 4
• 128 transmit queues
• Receive header replication
• Dynamic interrupt moderation
• DCA support
• TCP timer interrupts
• Relaxed ordering
• Support for 64 virtual machines per port (64 VMs x 2 queues)
• Support for Data Center Bridging (DCB)(802.1Qaz, 802.1Qbb, 802.1p)

Host Interface

• PCIe Base Specification 2.0 (2.5GT/s) or (5GT/s)
• Bus width — x1, x2, x4, x8
• 64-bit address support for systems using more than 4 GB of
physical memory



MAC FUNCTIONS

• Descriptor ring management hardware for transmit and
receive
• ACPI register set and power down functionality supporting
D0 and D3 states
• A mechanism for delaying/reducing transmit interrupts
• Software-controlled global reset bit (resets everything
except the configuration registers)
• Eight Software-Definable Pins (SDP) per port
• Four of the SDP pins can be configured as general-purpose
interrupts
• Wake up
• Ipv6 wake-up filters
• Configurable flexible filter (through EEPROM)
• LAN function disable capability
• Programmable memory transmit buffers (160 KB/port)
• Default configuration by EEPROM for all LEDs for pre-driver
functionality
• Support for SR-IOV



Manageability

• Eight VLAN L2 filters
• 16 flex L3 port filters
• Four Flexible TCO filters
• Four L3 address filters (IPv4)
• Advanced pass through-compatible management packet
transmit/receive support
• SMBus interface to an external manageability controller
• NC-SI interface to an external manageability controller
• Four L3 address filters (IPv6)
• Four L2 address filters

 


Basic Features
Main ChipsetIntel® 82599EN
Bus Type

PCI Express* 2.0 (5GT/s) , operable in X8 or greater slots

ConnectorRJ45 (Copper)
Transmission rate10000 Mbps

Provides automatic configuration between 1000BASE-KX, 10GBASE-KX4, and 10GBASE-KR modes

FunctionIPMI pass-through via SMBus or NC-SI, iSCSI boot, WoL, PXE remote boot, VLAN filtering

IEEE Standard / Network topology

10GBase-SR \ 10GBase-LR \ 10GBase-LRM

IEEE 802.3ae, IEEE 802.3aq, IEEE 802.3az, IEEE 802.3au, IEEE 802.3Qbg, IEEE 802.3Qbb

System RequirementsWindows Server 2003 / Server 2008 / R2 / Server 2012 / R2
Win 7 / Win 8 / Win 8.1 / Win 10 32&64Bit
DOS, Linux, FreeBSD, Novell, UnixWare / OpenUnix 8
Applicable fieldsDesktops, Servers, Workstations
Hardware
Power
CertificationsFCC, CE, RoHS
Metal BracketFull-height end bracket / Low-profile end bracket
LED Indicators10Gb/s= Activity Yellow / Link Green
Environmental
Operating temperature0 ~ 55 ℃ (32 ~ 131℉)
Storage temperature-40 ~ 70 ℃ (-40 ~ 158 ℉)
Storage humidity90% Non-condensing relative humidity at 35 ℃
Packing details
Dimensions (unit: mm)
Package Size(LxWxH)175x 125 x 30 mm
Product codeMain productsAccessoriesRemarks
PO #: ST721382599EN 10GbE PCI-E NICCD driver 


Product manual


Low-profile end bracket