USB 3.0 Gigabit Fiber Ethernet Adapter RTL8153

USB3.0 to SFP Gigabit Fiber Optical Adapter. Based on Realtek RTL8153 chipset. 

Supports Full Duplex flow control (IEEE 802.3x)

USB 3. 0 to Fiber provide higher bandwidth and improved protocols for data exchange between the host and the device.

The Realtek RTL8153 10/100/1000M Ethernet controller combines an IEEE 802.3u compliant Media Access Controller (MAC), 

USB 3.0 bus controller, and embedded memory. With state-of-the-art DSP technology and mixed-mode signal technology, the RTL8153 

offers high-speed transmission over CAT 5 UTP cable or CAT 3 UTP (10Mbps only) cable. 

Functions such as Crossover Detection and Auto-Correction, polarity correction, adaptive equalization, cross-talk cancellation, echo 

cancellation, timing recovery, and error correction are implemented to provide robust transmission and reception capabilities. 

Features

Hardware

        • Integrated 10/100/1000M transceiver

        • Auto-Negotiation with Next Page capability

        • Supports USB 3.0, 2.0, and 1.1

        • Supports CDC-ECM

        • Supports LPM (Link Power Management)

        • Supports pair swap/polarity/skew correction

        • Crossover Detection & Auto-Correction

        • Supports Wake-On-LAN and ‘RealWoW!’

        • Supports ECMA-393 ECMA ProxZzzy Standard for sleeping hosts 

        • XTAL-Less Wake-On-LAN

        • Supports power down/link down power saving

        • Transmit/Receive on-chip buffer support

        • EEPROM Interface

        • Embedded OTP memory can replace external EEPROM

        • Built-in switching regulator and LDO regulator

        • Supports Customizable LEDs

        • Supports hardware CRC (Cyclic Redundancy Check) function

        • Supports 25MHz or 48MHz external clock (from oscillator or system clock source)

Software Offload

        • Microsoft NDIS5, NDIS6 Checksum Offload (IPv4, IPv6, TCP, UDP) and Segmentation Task-offload

          (Large send v1and Large send v2) support

        • Supports jumbo frame to 9K bytes

IEEE

        • Supports Full Duplex flow control (IEEE 802.3x)

        • Fully compliant with IEEE 802.3 and IEEE 802.3u

        • Supports IEEE 802.1P Layer 2 Priority Encoding

        • Supports IEEE 802.1Q VLAN tagging

        • Supports IEEE 802.3az-2010 (EEE)