PCI-E Intel X540 10GbE Dual- RJ45 Server NICs-SUNWEIT

Intel® Ethernet Converged Network Adapter X540

10GBASE-T converged network adapter simplifies migration to 10 GbE, provides iSCSI, FCoE, Virtualization,

and Flexible Port Partitioning.

Overview

The Intel^® Ethernet Converged Network Adapter X540 is the latest innovation in Intel's leadership to drive 10 Gigabit Ethernet into the broader server market. This adapter hosts Intel's latest Ethernet silicon, the Intel® Ethernet Controller X540, which is used by many OEMs as a single chip solution for LAN on Motherboard (LOM) to deliver 10 Gigabit Ethernet (10 GbE) on the latest server platforms.

The Intel^® X540 family Simplifies Migration to 10GbE to provide iSCSI, FCoE, Virtualization, and Flexible Port Partitioning. The X540 family works with legacy Gigabit Ethernet (GbE) switches and CAT-6a cabling. Install the X540 adapter into a server and the auto-negotiation between 1 GbE and 10 GbE provides the necessary backwards compatibility that most customers require for a smooth transition and easy migration to 10 GbE.

Key Features

• Low Cost, Low Power, 10 Gigabit Ethernet (10GbE) Performance for the Entire Datacenter

• Standard CAT-6a Cabling with RJ45 Connectors

• Backward Compatibility with Existing 1000BASE-T Networks Simplifies the Transition to 10GbE

• Flexible I/O virtualization for port partitioning and quality of service (QoS) of up to 64 virtual ports

• Unified Networking Delivering LAN, iSCSI, and FCoE in One Low Cost CNA

• Industry First Dual-Port 10GBASE-T Adapter with Single-Chip Solution with Integrated MAC + PHY

• Reliable and proven 10 Gigabit Ethernet technology from Intel Corporation

General specification
Controller-processor	Intel® Ethernet Controller X540
Bus type	PCI Express 2.1 (5.0 GT/s)
Bus width	x8 lane PCI Express, operable in x8 and x16 slots
Bus speed	20 Gbps uni-directional; 40 Gbps bi-directional (x8, encoded rate)
Connectors	2 x RJ45 Copper
Data rate	10 Gbps / 1 Gbps / 100 Mbps
Cabling Distances	10GBASE-T: • 100 m on Cat 6A • 55 m on Cat 6
	1000BASE-T: 100 m on Cat 5e, Cat 6 or Cat 6A
	100BASE-T: 100 m on Cat 5e, Cat 6 or Cat 6A
Interrupt levels	INTA, MSI, MSI-X
Network Standards Physical Layer Interface	IEEE 802.3: 1000BASE-T, 10GBASE-T, IEEE 802.3ad (link aggregation control protocol)
	IEEE 802.3 2005 flow control support, IEEE 802.1p, IEEE 802.1Q VLANs
	Tx / Rx IP, TCP, & UDP checksum offloading(IPv4, IPv6) capabilities
	Transmission control protocol (TCP), User Datagram Protocol (UDP), Internet Protocol (IP))
Operating System	Microsoft Vista*/ Windows 7/ Windows 8/ Windows 8.1/ Windows 10
	Windows Server 2003/ Server 2008/ 2008 R2/ Windows Virtual Server 2005
	Linux, SUSE* SLES 10* or later, Professional 9.2 or later, Red Hat Enterprise* 4* or later
	FreeBSD* 5.x or later, VMware* ESX 4.0/4.1, ESXi 5.0, Fedora, EFI 1.1
Hardware & environment
LED Indicators	2 x 2-LED: Link / ACT (1/port, link and speed) solid and blinking
LED Indicators	10 Gb/s: Green and Green blinking,1 Gb/s/100Mb/s: Green and Orange blinking
Certifications	FCC, CE, RoHS
Operating temperature	0 °C to 55 °C (32 °F to 131 °F)
Storage temperature	-40 °C to 70 °C (-40 °F to 158 °F)
Storage humidity	Maximum: 90% non-condensing relative humidity at 35 °C

Packing Accessories list
1 x PCI-E intel X540 10GbE Dual- RJ45 Server NICs 1 x User's Manual 1 x CD Driver 1 x Low profile bracket Note: Only the above package contents, other products are not included. The allowable error of size measurement is +/- 1~3mm, and the weight of the product is subject to the actual product.
Dimensions	L156 x W70mm (measured without PCIe bracket)
Package Size	L190 x W148 x H30mm (Built-in blister)
Product weight
Package weight

Documentation

Driver

订购表单-通用

PO#	P/N	Specifications	Ordering	Note
ST7253	SE-LGI540A-2BT	PCIe X8 10GbE Dual- RJ45 Server NICs
		Based on Intel X540 Ethernet Controller