PCI-E Intel I225-V 2.5G Multi-Gigabit Server NICs

Intel® I225 multi-gigabit Ethernet controller supporting mobile, desktop, workstation, value-server, or embedded space-constrained designs.

  • PO.: ST7265
  • P/N.: SE-LGI225V-BT
  • Bus Type: PCI Express X1
  • Media Port: RJ45 (Copper)
  • Main Chipset: Intel® I225-V


PCI Express Intel® I225 multi-gigabit Ethernet controller

supporting mobile, desktop, workstation, value-server, or embedded space-constrained designs.


Overview

PCI Express Intel I225 2.5G Network card, adopts Intel a high performance network controller i225-V. This controller with

Base-T copper networking interface, provides compact, single-port integrated multi-gigabit (up to2.5G) –MDI (Copper) standard IEEE802.3 Ethernet interface for 2500BASE-T,1000BASE-T,100BASE-TX,10BASE-TE connections, and it canalso support Intel vPro echnology on specific Intel platforms . It is designed for use on any mobile, desktop, workstation, value-server, or industrial designs that have critical space constraints.


Key Features

      • PCI Express 3.1 (5GT/s) x1 host interface

       • MDI (Copper) standard IEEE 802.3 Ethernet interface up to 2.5Gb/s¹

       • Time Sensitive Networking (TSN) capability support

       • Innovative power managementfeatures 

       • Support for Intel® Active Management Technology on systems enabled with Intel vPro® technology


       - Compliant with PCI Express specification Revision 3.1(5GT/s)

       - MDI(Copper) standard IEEE802.3 Ethernet interface up to 2.5Gb/s

       - Complies with single port 1GbE RJ45 port (copper)

       - Complies with the MDI standard IEEE802.3 Ethernet interface for2500BASE-T,1000BASE-T,100BASE-TX,10BASE-TE application

         ( IEEE802.3bz, IEEE802.3ab ,IEEE802.3u and IEEE802.3 )

       - IEEE802.3 Auto-negotiator

       - IEEE802.3x and IEEE802.3z compliant flow control support with software-controllable RX thresholds and TX pause frames

       - Automatic cross-over detection function(MDI/MDI-X)

       - IEEE 1588 Protocol and 802.1AS implementation

       - Supporting Time Sensitive Networking(TSN) Capabilities

       - Support IEEE802.3az-Energy Efficient Ethernet(EEE)

       - Full Wake-On-Lan support

       - TCP/UDP,IPv4 checksum offloads(Rx/Tx)

       - Transmit Segmentation offloading(TSO)(IPv4,IPv6)

       - Support for packets up to 9.5KB Jumbo Frames



General specification
Controller-processorIntel® Ethernet Controller I225
Bus typePCI Express* 3.1 (5GT/s) x1 host interface
Bus widthfor x1 width (Lane).
Connectors1 x RJ45 (copper)
Data rate2.5Gb/s / 1000Mbps / 100Mbps
Network Standards
Physical Layer Interface

2500BASE-T,1000BASE-T,100BASE-TX,10BASE-TE application

( IEEE802.3bz, IEEE802.3ab ,IEEE802.3u and IEEE802.3 )
IEEE 802.1Qbu, 802.3br, 802.1Qbv, 802.1AS-REV, 802.1p,Q, and 802.1Qav
Operating SystemWindows 10 32/64bit
Applicationsupporting mobile, desktop, workstation, value-server, or embedded space-constrained.

Hardware & environment

LED IndicatorsLink Activity/ACT LED: Green 
CertificationsFCC, CE, RoHS
Operating temperature0 °C to 55 °C (32 °F to 131 °F)
Storage temperature-40 °C to 70 °C (-40 °F to 158 °F)
Storage humidityMaximum: 90% non-condensing relative humidity at 35 °C





Packing Accessories list

1 x PCI-E Intel I225-V Single- 2.5G RJ45 Server NICs

1 x User's Manual
1 x CD Driver
1 x Low profile bracket


Note: 

Only the above package contents, other products are not included. 

The allowable error of size measurement is +/- 1~3mm, and the weight of the product is subject to the actual product. 

DimensionsL x Wmm (measured without PCIe bracket)
Package SizeL175 x W125 x H30mm (Built-in blister)
Product weight 
Package weight





 

Documentation 

Driver



订购表单-通用
PO#P/NSpecificationsOrdering Note
ST7265SE-LGI225A-BTPCI-E X1 2.5G Single- RJ45 Server NICs  
Based on Intel I225-V Ethernet Controller


 

Telephone
Email
Online map
QQ Service