PCI-E 3.0 ASM2824 X4X4 M.2 NVMe Extend Card

Low latency, Low cost, and Low power. it can enable users to build up various high speed I/O systems, including server, system storage or communication platforms.

  • PO.: ST530
  • P/N.: SE-M2A824A-4M
  • Bus Type: PCI Express X16
  • Media Port: M.2 Key M
  • Main Chipset: asmedia ASM2824


ASM2824 PCI Express 3.0 to X4X4 M.2 KEY M NVMe Adapter

It can enable users to build up various high speed I/O systems, including server, system storage or communication platforms.


Overview

This PCI Express 3.0 to X4X4 M.2 KEY M NVMe adapter, is used to ASMedia high-performance chipset ASM2824, it is a low latency, low cost, and low power 24-lane, it supports 4-Port x4 lane M.2 Key M SSD device. With upstream PCIe Gen 3x8 bandwidth, it can enable users to build up various high speed I/O systems, including server, system storage or communication platforms.


Key Features

    - Compliant with PCI Express Specification Revision v3.0

    - Backwards compatible with PCIe 2.0 and PCIe 1.0

    - Supporting transfer rate of 2.5Gb (250MB/s), 5Gb (500MB/s), and 8Gb (1GB/s)per lane

    - PCI Express interface: x16

    - Supports NVM Express (NVMe)

    - Support for 4-Port x4 lane M.2 Key M NVMe SSD device

    - Supports M.2 SSD modules sizes: 2230, 2242, 2260, 2280

    - Supports M.2 "M" key and "B+M" key with PCIe Protocol

    - M.2 Specification Revision 0.9

    - Automatic detection of lane configuration on boot-up

    - Support L1 substate deep power saving mode

    - Support wake up function in S3/S4

    - Support Hot-plug, surprise remove

    - operating temperature range: 0~85°C


No driver is required because the driver is transparent to the operating system


General specification
Controller-processorasmedia® ASM2824

Bus interface

PCI Express 3.0, Gen 3x8 bandwidth, M.2 Revision 0.9

Transmission interface4 x M.2 Key Mslot connector
1 xSATA power supply
Data ratetransfer rate of 2.5Gb(250MB/s),5Gb(500MB/s), and 8Gb(1GB/s)per lane
M.2 modules sizes2230, 2242, 2260, 2280
Operating modeSafe Mode: Mirror data from SSDs to mechanical hard drives for optimized data protection
Capacity Mode: Combine the capacity of solid state drives and mechanical hard disks 2-in-1
Operating Systems

Windows 7, Windows 8, Windows 8.1, Windows 10 (32/64bit)

Linux-kernel3.17 or above

Hardware & environment

LED IndicatorsN/A
CertificationsFCC, CE, RoHS
Operating temperature0 ~ +85° C
Humidity Non-Operating50% ~ 90% RH non-condensing (at temperatures of 25°C ~ 35°C)
Packing Accessories list

1 x PCIe x16 ASM2824 to x4*4 M.2 NVMe SSD adapter
1 x User's Manual
1 x Low profile bracket
8 x Screws
1 x Screw driver
4 x heat sink
1 x SATA power cable


Note: Only the above package contents, other products are not included.The allowable error of size measurement is +/- 1~3mm, and the weight of the product is subject to the actual product. 

DimensionsL169 x W67mm (measured without PCIe bracket)
L172 x W57mm (Aluminum radiator)
Package SizeL256 x W150 x H40 (Built-in Foam layer)
Product weight
Package weight

 

Documentation 

Driver




订购表单-通用
PO#P/NSpecificationsOrdering Note
ST530SE-M2A824A-4MPCI-E 3.0  X4X4 M.2 Key M NVMe adapter Card  
Based on asmedia ASM2824 Processor
Telephone
Email
Online map
QQ Service