PCI-E JMB585 M.2 + 4- SATA 6Gb/s Extend Card

Each port with a transmission speed up to 6Gbps. it can be widely applied to personal computers and other big data storage devices.

  • PO.: ST516
  • P/N.: SE-SAJ585C-4T1B
  • Bus Type: PCI Express X4
  • Media Port: SATA3.0+M.2 B KEY
  • Main Chipset: JMB585


JMB585 

PCI Express Gen 3x2

M.2 B KEY + 4- SATA 6Gb/s Bridge 


Overiver

The PCI Express X4 JMB585 M.2 KEY B & SATA 6Gbps Expansion card, used new JMB585 chip solution, high speed and stable performance, it is committed to solving user's demand for massive data space, the high-speed expansion card achieves PCI Express Gen 3x2 line bandwidth, with 4- SATA ports extending from the PC host to the PCI Express x4 slot, each port with a transmission speed up to 6 Gbps.it can be widely applied to personal computers and other big data storage devices.


Features

     PCI Express 

    - Supports up to two lane of PCI Express.

    - Complies with PCI Express Base Specification Revision 3.1a.

    - Supports PCIe link layer power saving mode.

    - 100MHz differential PCI Express reference clock in.

    

     SATA

    - Supports 4- SATA port.

    - Supports command-based and FIS-based for Port Multiplier.

    - Complies with SATA Specification Revision 3.2.

    - Supports AHCI mode and IDE programming interface.

    - Supports Native Command Queue (NCQ).

    - Supports SATA link power saving mode (partial and slumber)

    - Supports SATA plug-in detection capable.

    - Supports drive power control and staggered spin-up.

    - Supports SATA Partial / Slumber power management state.


     M.2 KEY 

    - For the SSD type: M.2 Key B, Size : 2230, 2242

    - M.2 Key B slot transfer protocol:  SATA 3.0


Plug-and-Play Supported, no additional software installation or settings required




General specification
Controller-processorJMB585

Bus interface

PCI Express Re 3.1a, Gen 3x2 line bandwidth

Transmission interface4 x SATA 3.0 Connector
1 x M.2 Key B Slot
transmit speedsup to 6Gb/s
M.2 interface sizes2230, 2242
ApplicationsM.2 Key B slot transfer protocol: SATA3.0
Plug-and-Play Supported, no additional software installation or settings required
Operating Systems

Windows 7, Windows 8, Windows 8.1, Windows 10 (32 / 64bit), Linux

one available PCI Express x4/x8/x16 slot

Hardware & environment

LED IndicatorsDATA Transfer: Link Activity / Blinking LED
CertificationsFCC, CE, RoHS
Operating temperatureN/A
Humidity Non-OperatingN/A
Packing Accessories list

1 x PCIe x4 JMB585 M.2 & SATA 3.0 Expansion card

1 x Low profile bracket

1 x User's Manual

5 x SATA Cable


Note: Only the above package contents, other products are not included.The allowable error of size measurement is +/- 1~3mm, and the weight of the product is subject to the actual product. 

DimensionsL x W mm (measured without PCIe bracket)
Package SizeL175 x W125 x H30 (Built-in Blister)
Product weight
Package weight

 

Documentation 

Driver




订购表单-通用
PO#P/NSpecificationsOrdering Note
   ST516   SE-SAJ585C-4T1BPCI-E X4 M.2 B KEY + SATA 3.0 Expansion card

Based on JBM585 Bridge Controller
Telephone
Email
Online map
QQ Service