Type-C to Gigabit Ethernet Adapter RTL8153

USB 10/100/1000M Ethernet Adapter, suitable for Desktop, Workstation, Server, communication platforms.

  • PO.: ST733
  • P/N.: SU-LG8153A-BT
  • Bus Type: USB TYPE
  • Media Port: RJ45 LAN
  • Main Chipset: Realtek RTL8153




The USB3.1 Gigabit SFP Fiber Network adapter used an controller RTL8153, Which is features USB3.0 to provide higher bandwidth and improved protocols for data exchange between the host and the device. USB3.0 also offers more advanced power management features for energy saving. The RTL8153 supports IEEE802.3az-2010, also known as Energy Efficient Ethernet (EEE), and it is fully compliant with Microsoft NDIS5, NDIS6(IPv4,IPv6,TCP,UDP)checksum features ,and supports IEEE802 IP layer 2 priority encoding and IEEE802.1Q Virtual bridged Local Area network(VLAN). It is suitable for desktop, workstation, server, communication platforms etc.



    • Integrated 10/100/1000Mbps-SX/LX transceiver

    • Auto-Negotiation with Next Page capability

    • Supports TYPE-C/USB 3.1 

    • Supports CDC-ECM

    • Supports LPM (Link Power Management)

    • Supports pair swap/polarity/skew correction

    • Crossover Detection & Auto-Correction

    • Supports Wake-On-LAN and ‘RealWoW!’ (Wake-On-WAN) Technology 

    • Supports ECMA-393 ECMA ProxZzzy Standard for sleeping hosts

    • XTAL-Less Wake-On-LAN

    • Supports power down/link down power saving

    • Transmit/Receive on-chip buffer support

    • EEPROM Interface

    • Embedded OTP memory can replace external EEPROM

    • Built-in switching regulator and LDO regulator

    • Supports Customizable LEDs

    • Supports hardware CRC (Cyclic Redundancy Check) function

Software Offload

    • Microsoft NDIS5, NDIS6 Checksum Offload (IPv4, IPv6, TCP, UDP) and Segmentation 

       Task-offload (Large send v1and Large send v2) support

    • Supports jumbo frame to 9K bytes


    • Supports Full Duplex flow control (IEEE 802.3x)

    • Fully compatible with IEEE 802.3 and IEEE 802.3u

    • Supports IEEE 802.1P Layer 2 Priority Encoding

    • Supports IEEE 802.1Q VLAN tagging

    • Supports IEEE 802.3az-2010 (EEE)

General specification
Controller-processorRealtek RTL8153
Applicable NetworkUSB 3.1 Gigabit Ethernet , Integrated 1000Mbps-SX/LX transceiver
Upstream portUSB 3.1 Type C positive and negative interpolation
Downstream portRJ45 copper (LAN)
Transmission rate10/100/1000Mbps
Jumbo frame9K bytes
Network topologyFull Duplex flow control (IEEE 802.3x), IEEE 802.3 and IEEE 802.3u
IEEE 802.1P Layer 2 Priority Encoding, IEEE 802.1Q VLAN tagging, IEEE 802.3az-2010 (EEE)
System requirements

Windows Server2003 / XP / Vista / Windows 7/ Windows 8 / Windows 8.1 / Windows 10 (32/64bit)

DOS, Linux, MAC OS

Hardware & environment

LED IndicatorsN/A
MaterialAluminum shell
CertificationsFCC, CE, RoHS
Operating temperature0℃ -- 70℃
Storage temperature-55 °C -- +125 °C
Relative humidity5%--95% Non-condensing

Packing Accessories list

1 x USB 3.1 to Gigabit Ethernet LAN adapter

1 x User's Manual
1 x CD Driver


Only the above package contents, other products are not included. 

The allowable error of size measurement is +/- 1~3mm, and the weight of the product is subject to the actual product. 

DimensionsL x W x mm
Package SizeL175 x W125 x H30mm (Built-in blister)
Product weight g
Package weight




PO#P/NSpecificationsOrdering Note
ST733SU-LG8153A-BTUSB 3.1 to Gigabit Ethernet LAN adapter  
Based on Realtek RTL8153 Ethernet Controller


Online map
QQ Service