PCI-E ASM1061 eSATA+SATA 6Gb/s Extend Card

This board is a single-chip, PCI Express to two SATA Gen III 6Gb/s channels host controller that brings server-class features to the desktop.

  • PO.: ST51
  • P/N.: SE-SA1061A-2e2T
  • Bus Type: PCI Express X1
  • Media Port: eSATA+SATA Connector
  • Main Chipset: ASM1061


PCI Express 2.0 to SATA 6Gbps Controller


PCI Express ASM1061 SATA Gen III 6Gb/s 2- channels host controller that brings server-class features to the desktop. This board enables the use of the industry's newest and fastest hard drives at 6Gb/s while providing backward compatibility to legacy SATA 1.5Gb/s or 3Gb/s drives. It uses the same cable and connectors as previous SATA generations to ease integration. Besides, PCI Express 2.0 double the bandwidth of the existing PCI Express bus for faster data throughput. It will enhance system performance for every type of computer user. Each PCI-Express 2.0 lane provides up to 500MB/s of throughput. It also backward compatible with previous generation of PCI Express 1.0 technology.

     ▪ PCI Express Features

    - 1- lane PCI Express for 2.5 and 5GHz signaling

    - Single virtual channel

    - SSC support

    - ECRC and Advanced Error Reporting capability

    - 100MHz differential PCI Express reference clock in

    - Maximum Payload up to 128 bytes

     ▪ Serial ATA Features

    - 2 ports Serial ATA PHY for 1.5, 3.0 and 6.0GHz signaling

    - Support IDE/AHCI mode

    - Support Native Command Queue (NCQ)

    - Support Gen 1m and Gen 2m SATA PHY

    - Support Port Multiplier

     ▪ Hardware Description

There are four SATA ports available on the SATA 6G PCIe Card, 2 internally SATA connectors and 2 eSATA connectors externally. Based on the image below, the respective ports have been name Con1 through Con4. Con3 & Con4 are internal SATA ports, while Con1 and Con2 are external SATA ports. By changing the jumper setting on the SATA 6G PCIe Card circuit board, you will be able to utilize two of the ports simultaneously. Please designate which ports you wish to use, by adjusting jumper setting according to the chart below. By default, Con3 & 4 are working.



General specification

Bus interface

PCI Express Rev. 2.0, Serial ATA AHCI Spec. Rev.1.3, Serial ATA Revision 3.0

Transmission interface2 x SATA 3.0 Connector
2 x eSATA 3.0 Connector
2 x Jumper ports
transmit speedsup to 6Gb/s
ApplicationPlug-and-Play Supported, no additional software installation or settings required
Operating Systems

XP /Vista /Server 2003 /Server 2008, Windows 7, Windows 8, Windows 8.1, Windows 10 (32 / 64bit), Linux

one available PCI Express x1/x4/x8/x16 slot

Hardware & environment

LED IndicatorsDATA Transfer: Link Activity/Blinking LED
CertificationsFCC, CE, RoHS
Operating temperatureN/A
Humidity Non-OperatingN/A
Packing Accessories list

1 x PCIe x1 ASM1061 eSATA+SATA Expansion card

1 x Low profile bracket

1 x CD Driver

1 x User's Manual

2 x SATA Cable

Note: Contents may vary depending on country/market.

Note: Only the above package contents, other products are not included.The allowable error of size measurement is +/- 1~3mm, and the weight of the product is subject to the actual product. 

DimensionsL67 x W68 mm (measured without PCIe bracket)
Package SizeL175 x W125 x H30 (Built-in Blister)
Product weight42.6g
Package weight




PO#P/NSpecificationsOrdering Note
   ST51   SE-SA1061A-2e2TPCI-E X1 eSATA+SATA 6Gb/s Expansion card

Based on ASM1061 Controller
Online map
QQ Service