MCS9901
PCIe to Dual Serial and Single Parallel Controller
Overview
MCS9901 is a single lane multifunction PCI express to I/O controller. This PCI Express card expands your PC by two external serial Ports, also one external parallel Ports. You can connect devices like scanner, printer, mouse etc.to the card. enabling this card to be installed on any PCI-Express capable PC desktop system.
General Features
• PCI Express
-- Single-lane (X1) PCI Express End-point Controller with integrated PHY
-- Compliant with PCI Express Base Specification, Revision 1.1
-- Compliant with PCI Express Card Specifications
-- Supports three PCI Express functions
-- Supports auto completion of configuration requests
-- Supports built in flow control
-- Supports Message TLP (Error) generation
-- Supports integrated time out handling of Non-posted request
-- Supports both legacy and MSI Interrupt
-- Supports PCIe Power Management
• Serial Port
-- Two 16C450 / 550 / Extended 550 / 650 / Enhanced Mode compatible UARTs
-- Supports RS232, RS422 & RS485 modes
-- Bi-directional speeds from 50 bps to 16 Mbps per port
-- Full Serial Modem Control
-- Supports Hardware, Software Flow Control
-- Supports 5, 6, 7, 8 bit Serial format
-- Supports Even, Odd, None, Space and Mark parity
-- Supports Custom baud rate by programming internal PLL or external clock
-- Supports On Chip 256 Byte depth FIFOs in Transmit, Receive path of each Serial Port
-- Supports remote wakeup and power management features
-- Serial Port transceiver shutdown support
-- Supports Slow IrDA mode (up to 115200bps) on all Serial Ports
• Parallel Port
-- Compatible with IEEE 1284
-- Nibble Mode
-- Byte Mode
-- Enhanced Parallel Port (EPP 1.9)
-- Extended Capability Port (ECP)
-- FIFO mode (Buffered SPP mode)
-- Operating Temperature : 0 to +70°C