PCI-E MCS9865 2S1P Serial&Parallel Control card

MCS9865 is ideally suited for Desktop PC and Notebook applications, such as PCI / Mini-PCI add-in Cards for high-speed Serial / Parallel Port expansion.

  • PO.: ST326
  • P/N.: SP-SP9865A-2S1P
  • Bus Type: PCI
  • Media Port: DB-9+DB-25 Connectors
  • Main Chipset: ASIX MCS9865


ASIX® MCS9865

PCI to Dual Serial and Single Parallel Controller


Product Description

MCS9865 is a PCI based Peripheral Controller. It supports dual-channel high performance Serial Ports, dual enhanced IEEE 1284 compliant parallel ports and an ISA style interface. MCS9865 is ideally suited for Desktop PC and Notebook applications, such as PCI / Mini-PCI add-in Cards for high-speed Serial / Parallel Port expansion. On-Chip Serial Ports of MCS9865 support extended 16C550 UART mode and support serial speeds up to 16Mbps. MCS9865 has 256 byte deep Transmit and Receive FIFO for each UART. Deep FIFOs enable high serial speeds / throughputs and reduce CPU Utilization. Each Serial Port is compatible with industry standard 16C550 devices including Standard COM Port of Industrial PC. The Parallel Port interface is an IEEE 1284 compliant SPP / PS2 / EPP / ECP Parallel Port that fully supports Centronics interface.


KEY Features

PCI

- Fully compliant with PCI Local Bus Specification, Revision 2.3

- Compatible for MiniPCI application requirements

- Fully customizable PCI Configuration Space

- PCI signaling Supports PCI Power Management

- Compatible with 3.3V and 5V

- On-Chip Dual Voltage Regulator (5V to 3.3V & 1.8V)


• Serial Port

- Four 16C 450 / 550 / Extended 550 compatible UARTs

- Supports RS232, RS485 & RS422 modes

- Bi-directional Speeds from 50 bps to 16 Mbps / Port

- Full Serial modem control

- Supports Hardware, Software flow control

- 5, 6, 7, 8, 9-bit Serial format support

- Even, Odd, None, Space & Mark parity supported

- Custom BAUD rate support with external clock / by programming internal PLL

- On Chip deep 256 Byte FIFOs in Transmit & Receive paths of each Serial Port

- Supports remote wakeup and power management features

- Serial Port transceiver shutdown support

- Supports Slow IrDA on all Serial Ports


• IEEE1284 Parallel Port

- Multi-mode IEEE1284 compliant controller (SPP, PS2, EPP, ECP)

- Faster data rates up to 1.5Mbytes/sec for parallel port


Operating Temperature : -40 to +85 ℃



General specification
Chipset-controllerASIX® MCS9865

Bus type

PCI Revision.2.3
Transmission media1 x DB25 female Parallel connector
2 x DB-9 male Serial connectors
Data rateParallel: up to 1.5 Mbytes/sec
Serial: Bi-directional Speeds from 50 bps to 16 Mbps/Port
FunctionSupports Hardware, Software flow control
Supports remote wakeup and power management features
5, 6, 7, 8, 9-bit Serial format support, Even, Odd, None, Space & Mark parity supported
Multi-mode IEEE1284 compliant controller (SPP, PS2, EPP, ECP)
Operating SystemsWindows 2000 / XP / Server2003 / Vista / Win 7 / Win 8 / Win 8.1 / Win10, 32 or 64bit

Linux2.6.27,2.6.31,2.6.32,3.x.x and later

Hardware & environment

Operating Temperature-40 to +85℃
Storage temperature-55 to +125℃
Packing Accessories list

1 x PCI 2S1P Serial & Parallel Control card

1 x CD driver

1 x Low-profile bracket


Note: Only the above package contents, other products are not included.The allowable error of size measurement is +/- 1~3mm, and the weight of the product is subject to the actual product.

DimensionsL121 x W58 mm (measured without PCI bracket)
Package SizeL180 x W150 x H30 (Built-in Blister)
Product weight90.6 g
Package weight



Documentation

Driver




订购表单-通用
PO#P/NSpecificationsOrdering Note
    ST326    SP-SP9865A-2S1PPCI 2S1P Serial & Parallel Control card

Based on ASIX MCS9865 Controller
Telephone
Email
Online map
QQ Service