Intel WG82583V Single-Port PCI-Express* 10/100/1000 Network Connectivity Adapter
• Ideal for consumer electronics and other small form-factor embedded applications
• Low power: < 750 mW GbE and < 300 mW 10/100
• Operating System Support: Linux*, FreeBSD*, Windows* CE, Windows XP Embedded, and Windows Home Server
This PCIe Gigabit Network card is single, compact, low power components that offer a fully-integrated Gigabit Ethernet Media Access Control and physical layer port. It is used of Intel high-performance chip WG82583V, and it is uses the PCI Express architecture and provides a single-Port implementation in a relatively small area so it can be used for server and any other personal computers.
PRODUCT FEATURES
- Fully compliant with PCI-Express Base Specification Revision1.1
- Single-Lane (x1) PCI-Express with throughput up to 2.5Gbps
- Fully Plug and Play compatible
- Full-duplex operation at 10/100/1000Mb/s
- Half-duplex operation at 10/100Mb/s
- 10/100/1000 data rate auto negotiation operation
- Fully compliant with IEEE802.3,802.3u,802.3ab
- Support full duplex flow control (IEEE802.3x)
- Supports IEEE802.1P Layer 2 Priority Encoding
- Supports IEEE802.1Q VLAN tagging
- IPv4 and IPv6 checksum offload support
- Receive Side Scaling (RSS) with two hardware receive queues
- Supports jumbo frame to 9k bytes
- Crossover detection and Auto correction operation
Essentials | |
Product Collection | Intel GbE Ethernet Server Adapter |
Controller Processors | Intel WG82583V |
Bus Type/Bus Width | PCIe v.1.1 (2.5 GT/s), PCIe* x1 interface |
Connections | 1 x RJ45 Copper |
Data Rate Supported | 10/100/1000 Mbps (Copper) |
Cable Distances | Copper: up to 100 m |
Category-3 or higher for 10BASE-T operation Category-5 or higher for 100BASE-TX operation Category-5e or higher for 1000BASE-T operation | |
Bracket | Full-height bracket installed. Low-profile bracket included in package |
Dimension | 103 mm x 56 mm (PCIe Board) |
Technical Specifications | |
IEEE standard/Network topology | Fully compliant with IEEE802.3,802.3u,802.3ab |
Integrated PHY for 10/100/1000 Mbps (megabits per second) for multi-speed, Full, and Half-duplex operation | |
Jumbo frame | 9K bytes |
System Requirements | |
System Client | Linux*, FreeBSD*, Windows* CE, Windows XP Embedded, and Windows Home Server |
Environment & Certification | |
Power consumption (typical) | 750 mW at 1000Base-T active |
300 mW at 100Base-T active | |
Storage Humidity Maximum | 90% non-condensing relative humidity at 35 °C |
Storage Temperature | -40 °C to 125 °C |
Operating Temperature | -10 °C to 85 °C |
Connect Speed LED Indicators | Not illuminated=10 Mb/s; green=100 Mb/s; amber=1 Gb/s (Copper) |
Green=1 Gb/s. Not illuminated=no link (Fiber) | |
Certifications | CE FCC RoHS |
SUNWEIT
We make every effort to troubleshoot technical information or other errors in product specifications, but some errors may still occur due to our oversight.
We reserve the right not to accept any order that contains incorrect information. Images are for reference only.
All other trademarks or trade names mentioned in the text refer to the organization that owns the trademark or name or its products.
We do not own any rights or interests in the trademarks or trade names of other organizations.
Copyright © 2023 SUNWEIT Corporation 丨 All Rights Reserved 丨 Privacy Protection 丨 Legal Agreements