10GBASE-T Converged Network Adapter (CNA)

Simplifies Migration to 10 Gigabit Ethernet (GbE), Provides iSCSI, FCoE, Virtualization and Flexible Port Partitioning (FPP)

▪ PCI Express* (PCIe*) v3.0 with up to 8.0 GT/s.

▪ Low cost, low power, 10 GbE performance for the entire datacenter.

▪ Intel second generation, single- and dual-port 10GBASE-T controller with integrated MAC and PHY.

▪ Standard CAT 6a cabling with RJ45 connectors.

▪ Supports NBASE-T* technology (2.5 and 5.0 GbE over CAT 5e)1.

▪ Backward compatibility with existing 1000BASE-T networks simplifies the transition to 10 GbE.

▪ Unified networking delivering LAN, iSCSI and FCoE in one low-cost CNA.‍

▪ Flexible I/O virtualization for port partitioining and Quality of Service (QoS) of up to 64 virtual ports.

▪ Reliable, proven 10 GbE technology from Intel Corporation.

PCI Express X4 Intel X550 Dual-Port 10G PoE+ Vision Network Adapters, adopts Intel a high performance 10G network controller X550, By providing unparalleled features of virtualization, flexible features, and proven reliable performance, 

it solves the high requirements of the generation data center, it has Dual-Port 10Gbps RJ45 port which can setup a long-distance link with a file server or a remote workstation. It also supports IEEE802.3af, IEEE802.3at Protocols, 

each port supports the maximum power supply of 30W,can achieve remote equipment power supply.

Specification

• PCI-Express lanes: x4 

• PCI Express* (PCIe*) v 3.0 with up to 8.0 GT/s.

• Unified networking delivering LAN, iSCSI and FCoE in one low-cost CNA.

• Flexible I/O virtualization for port partitioining and Quality of Service (QoS) of up to 64 virtual ports.

• Each port supports maximum power supply of 30W

• Each port support power voltage: 44-57VDC

• Complies with dual port 10GbE RJ45 port 

• Operate Speeds: 10Gb/s, 5Gb/s, 2.5Gb/s, 1Gb/s, 100Mb/s

• Low cost, low power, 10 GbE performance for the entire datacenter.

• Intel's second generation, single- and dual-port 10GBASE-T controller with integrated MAC and PHY.

• Standard CAT 6a cabling with RJ45 connectors.

• Supports NBASE-T* technology (2.5 and 5.0 GbE over CAT 5e).

• Backward compatibility with existing 1000BASE-T networks simplifies the transition to 10 GbE.

• 10GBASE-T as per the IEEE 802.3an standard

• 1000BASE-T and 100BASE-TX as per the IEEE Standard 802.3-2012

• NBASE-T as per the IEEE P802.3bz/D1.1 Draft Standard for Ethernet Amendment

• Half duplex at 10/100Mbp operation and full duplex operation at all supported speeds

• Layer 2 functions: IEEE 802.3x Flow Control - IEEE 802.1q VLAN

• Supports Receive-side scaling (RSS)

• Supports IPv 4, IPv 6 protocols

• Supports Jumbo Frames up to 15.5K

• Supports UDP. TCP and IP Checksum offloading 

• 128 transmit queues

• Statistics for management and RMON

• Support for 64 virtual machines per port (64VMs x2 queues)

• Support for Data Center Bridging(DCB)(802.1Qaz, 802.1Qbb, 802.1p)

• Interrupt throttling control to limit maximum interrupt rate and improve CPU usage