Industry-leading, energy-efficient design for 10/40GbE performance and multi-core processors.
▪ PCI Express (PCIe) v3.0, x8
▪ Supports 4 x 10GbE, 1 x 40GbE or 2 x 40GbE configurations
▪ Exceptional low power adapters
▪ Network Virtualization offloads including VxLAN, GENEVE, NVGRE, MPLS, and VxLANGPE with Network Service Headers (NSH)
▪ Intel Ethernet Flow Director for hardware-based application traffic steering
▪ Dynamic Device Personalization (DDP) enables increased packet processing efficiency for NFV and Cloud deployments
▪ Data Plane Development Kit (DPDK) optimized for efficient packet processing
▪ Excellent small packet performance for network appliances and Network Functions Virtualization (NFV)
▪ Intelligent offloads to enable high performance on servers with Intel Xeon processors
▪ I/O virtualization innovations for maximum performance in a virtualized server
The single or dual-port Intel Ethernet Converged Network Adapter XL710 is an energy-efficient 40GbE adapter that is backwards compatible to 10GbE. XL710 network adapters are the foundation for server connectivity, providing broad interoperability, critical performance optimizations,
and increased agility for Communications, Cloud, and Enterprise IT network solutions.
• Interoperability
- Multiple speeds and media types for broad compatibility backed by extensive testing and validation.
• Optimization
- Intelligent offloads and accelerators to unlock network performance in servers with Intel® Xeon® processors.
• Agility
- Both Kernel and Data Plane Development Kit (DPDK) drivers for scalable packet processing.
Specification
• PCI-Express Host interface specification v3.0 x8 and higher
• Supports the PCI Bus Power Management specification and section 5 of the PCI Express Base Specification
• PCI-Express lanes: x8
• Dual-port 40GbE adapters
• Network Virtualization offloads including VXLAN, NVGRE, Geneve and Network Service Headers.
• Intel Ethernet Flow director for hardware based application traffic steering.
• Intelligent offloads to enable high performance with Intel Xeon processor-based servers
• Packet checksum offloads: Calculates IP,UDP, TCP, and Stream transmission Protocol checksums for insertion into transmitted packets and for integrity checking on received packets,
Includes support for UDP and TCP checksums in both IPv4 and IPv6 data grams.
• I/O virtualization innovations for maximum performance in a virtualized server
• Support for optional End-to-End CRC generation and checking
• Supports up to 1024 LAN queue sets(768 typically available)
• Supports up to 384 VSIs with average of two TCs allocated per VSI
• Supports up to 16VEB/VEPA switching components
• Supports Network standard: IEE802.3 40GBASE-SR4, 40GBASE-LR4, 40GBASE-CR4
• Supports the PXE remote boot standard, Also supports Internet small Computer system interface
Essentials | |
Product Collection | Intel XL710 40GbE Network Adapter |
Controller Processors | Intel XL710-BM2 |
Bus Type/Bus Width | PCI Express (PCIe) 3.0 x8 |
Connections | 2 x QSFP+ cages supporting Direct Attach Copper (DAC) Twinaxial cable and optical transceivers |
Data Rate Supported Per Port | 40/10GbE |
• DAC: 40GbE • 4 x SFP+ Breakout Cable: 10GbE | |
Cabling Type | QSFP+ Direct Attach Cabling up to 10m |
Bracket | Full-height bracket installed. Low-profile bracket included in package |
Dimension | 167 mm x 69 mm (PCIe Board) |
Technical Specifications | |
Network Standards Physical Layer Interfaces | IEEE802.3: 40GBASE-SR4 and -LR4 |
SFF-8431: 40GSFP+ CR4 (DAC), 40GSFP+ CR4 to 4x SFP+ (Breakout Cable) | |
Interrupt Levels | INTA, MSI, MSI-X |
Virtualization Technology | Network Virtualization offloads including VxLAN, GENEVE, NVGRE, MPLS, and VxLANGPE with Network Service Headers (NSH) |
System Requirements | |
Windows Client | - - |
Windows Sever | 2008 R2/ 2012/ 2012 R2/ 2016/ 2019/ 2022 |
Linux | RHEL9.1 & 8.7, SLES15 SP4, SLES12 SP5, Ubuntu*22.04 LTS/20.04 LTS, Debian*11, FreeBSD*13 / 12.3 |
Environment & Certification | |
Power Consumption | Max. 9.5W |
Airflow | 150 LFM minimum required For LR4 the following is required: • 55 °C @ 400 LFM • 50 °C @ 250 LFM • 45 °C @ 150 LFM |
Storage Humidity Maximum | 90% non-condensing relative humidity at 35 °C |
Storage Temperature | -40 °C to 70 °C (-40 °F to 158 °F) |
Operating Temperature | 0 °C to 55 °C (32 °F to 131 °F) |
LED Indicators | LINK (solid) and ACTIVITY (blinking) |
LINK SPEED (Green = 40Gbps; Yellow = 10Gbps) | |
Certifications | CE FCC RoHS |
SUNWEIT
We make every effort to troubleshoot technical information or other errors in product specifications, but some errors may still occur due to our oversight.
We reserve the right not to accept any order that contains incorrect information. Images are for reference only.
All other trademarks or trade names mentioned in the text refer to the organization that owns the trademark or name or its products.
We do not own any rights or interests in the trademarks or trade names of other organizations.
Copyright © 2023 SUNWEIT Corporation 丨 All Rights Reserved 丨 Privacy Protection 丨 Legal Agreements