Low-power, small-footprint, dual-port gigabit network adapter
with support for consumer electronics and other small form-factor embedded applications
This Mini PCIe Gigabit Network card is single, compact, low power components that offer a fully-integrated Gigabit Ethernet Media Access Control and physical layer port. It is used of Intel high-performance chip WG82583V,
and it is uses the PCI Express architecture and provides a dual-Port implementation in a relatively small area so it can be used for server and any other personal computers.
Features
- Compatible with PCI-E MINI card electromechanical specification revision1.2
- Compatible with Half /Full size Mini card type form factor
- Fully compliant with PCI-Express Base Specification Revision1.1
- Single-Lane (x1) PCI-Express with throughput up to 2.5Gbps
- Fully Plug and Play compatible
- Full-duplex operation at 10/100/1000Mb/s
- Half-duplex operation at 10/100Mb/s
- 10/100/1000 data rate auto negotiation operation
- Fully compliant with IEEE802.3, IEEE802.3u, IEEE802.3ab
- Support full duplex flow control (IEEE802.3x)
- Supports IEEE802.1P Layer 2 Priority Encoding
- Supports IEEE802.1Q VLAN tagging
- IPv4 and IPv6 checksum offload support
- Receive Side Scaling (RSS) with two hardware receive queues
- Supports jumbo frame to 9k bytes
- Crossover detection and Auto correction operation
Essentials | |
Product Collection | Mini PCIE GbE Network Adapter |
Controller Processors | Intel WG82583V |
Bus Type/Bus Width | Mini PCIE |
Connections | 2 x RJ45 (Copper) |
Data Rate Supported | 10/100/1000 Mbps (Copper) |
Cable Distances | Copper: up to 100 m |
Category-3 or higher for 10BASE-T operation Category-5 or higher for 100BASE-TX operation Category-5e or higher for 1000BASE-T operation | |
Network Cable Length | Approx. 30.5 cm |
Dimension | 30 mm x 51 mm (Mini PCIE) |
Technical Specifications | |
IEEE Standard / Network topology | IEEE 802.3/10BASE-T, 100BASE-TX, 1000BASE-T |
IEEE* 802.3 Auto-negotiation | |
1Gb/s Ethernet IEEE 802.3, 802.3u, 802.3ab PHY specifications Compliant | |
Integrated PHY for 10/100/1000 Mb/s for multispeed, fulland half-duplex | |
IEEE 802.3x and 802.3z compliant flow control support with software-controllable Rx thresholds and Tx pause frames | |
Automatic cross-over detection function (MDI/MDI-X) | |
IEEE 1588 protocol and 802.1AS implementation | |
Performance Features | Integrated PHY for 10/100/1000 Mbps (megabits per second) for multi-speed, full, and half-duplex operation |
System Requirements | |
Operating System Support | Linux*, FreeBSD*, Windows* CE, Windows XP Embedded, and Windows Home Server |
Windows XP /Vista /8 /8.1 and 10 32-64Bit, Server 2003/ Server 2008 R2/ Server 2012 R2 | |
FreeBSD, Linux, VMware ESXi | |
Environment & Certification | |
Power consumption (typical) | • 750 mW at 1000Base-T active |
• 300 mW at 100Base-T active | |
Storage Humidity Maximum | 90% non-condensing relative humidity at 35 °C |
Storage Temperature | -40˚ C to 125˚ C |
Operating Temperature | 0˚ C to 85˚ C |
Connect Speed LED Indicators | Not illuminated=10 Mb/s; green=100 Mb/s; amber=1 Gb/s (Copper) |
Green=1 Gb/s. Not illuminated=no link (Fiber) | |
Certifications | CE FCC RoHS |
SUNWEIT
We make every effort to troubleshoot technical information or other errors in product specifications, but some errors may still occur due to our oversight.
We reserve the right not to accept any order that contains incorrect information. Images are for reference only.
All other trademarks or trade names mentioned in the text refer to the organization that owns the trademark or name or its products.
We do not own any rights or interests in the trademarks or trade names of other organizations.
Copyright © 2023 SUNWEIT Corporation 丨 All Rights Reserved 丨 Privacy Protection 丨 Legal Agreements